綜合資訊
ASTM-A鋼材標準(2)(A314-A496)
發布人:管理員 發布日期:2014-11-11 08:21:42
ASTM-A鋼材標準(2)(A314-A496) | ||
標準號 | 中文名稱 | 英文名稱 |
A314-97(2002) | 鍛造用不銹及耐熱鋼坯及鋼棒規格 | Standard Specification for Stainless Steel Billets and Bars for Forging |
A319-71(2001) | 高溫?zé)o壓部件用灰鐵鑄件 | Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts |
A320/A320M-04 | 低溫用合金鋼螺栓材料規格 | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service |
A321-90(2001) | 經淬火和回火的碳素鋼棒 | Standard Specification for Steel Bars, Carbon, Quenched and Tempered |
A322-91(2001)e1 | 合金鋼棒材.級別 | Standard Specification for Steel Bars, Alloy, Standard Grades |
A323-93(2000) | 硼鐵規格 | Standard Specification for Ferroboron |
A324-73(2000) | 鈦鐵合金 | Standard Specification for Ferrotitanium |
A325-04a | 經熱處理最小抗拉強度為120/105ksi的熱處理鋼結構螺栓 | Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength |
A325M-04a | 經熱處理最小抗拉強度為830Mpa的熱處理鋼結構螺栓 | Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric] |
A327-91(1997) | 鑄鐵沖擊試驗方法 | Standard Test Methods for Impact Testing of Cast Irons |
A327M-91(1997) | 鑄鐵沖擊試驗方法(米制) | Standard Test Methods for Impact Testing of Cast Irons (Metric) |
A328/A328M-03 | 薄鋼板樁 | Standard Specification for Steel Sheet Piling |
A333/A333M-04a | 低溫用無縫與焊接鋼管規格 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service |
A334/A334M-04a | 低溫設備用無縫與焊接碳素和合金鋼管 | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service |
A335/A335M-03 | 高溫用無縫鐵素體合金鋼管 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
A336/A336M-03a | 壓力與高溫部件用合金鋼鍛件規格 | Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts |
A338-84(2004) | 鐵路,船舶和其他重型裝備在溫度達到650華氏度(345攝氏度)時使用的可鍛鑄鐵法蘭,管件和閥門零件 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
A340-03a | 有關磁性試驗用符號和定義的術語 | Standard Terminology of Symbols and Definitions Relating to Magnetic Testing |
A341/A341M-00 | 用直流磁導計和沖擊試驗法測定材料的直流磁性能的試驗方法 | Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods |
A342/A342M-99 | 磁鐵材料導磁率的試驗方法 | Standard Test Methods for Permeability of Feebly Magnetic Materials |
A343/A343M-03 | 在電力頻率下用瓦特計-安培計-伏特計法(100-1000赫茲)和25 厘米艾普斯亭(EPSTEIN)機架測定材料的交流電磁性能的試驗方法 | Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame |
A345-98 | 磁設備用平軋電爐鋼 | Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications |
A348/A348M-00 | 用瓦特計--安培計--伏特計法(100-10000赫茲)和25厘米艾普斯亭框測定材料的交流磁性能的試驗方法 | Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame |
A350/A350M-04 | 要求進行缺口韌性試驗的管道部件用碳素鋼與低合金鋼鍛件技術規范 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
A351/A351M-03 | 容壓零件用奧氏體及奧氏體鐵素體鑄鐵的技術規范 | Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts |
A352/A352M-03 | 低溫受壓零件用鐵素體和馬氏體鋼鑄件規格 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service |
A353/A353M-93(1999) | 壓力容器用經二次正火及回火處理的含9%鎳的合金鋼板 | Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered |
A354-04 | 淬火與回火合金鋼螺栓,雙頭螺栓及其他外螺紋緊固件規格 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs,and Other Externally Threaded Fasteners |
A355-89(2000) | 滲氮用合金鋼棒 | Standard Specification for Steel Bars, Alloys, for Nitriding |
A356/A356M-98(2003) | 蒸汽輪機用厚壁碳素鋼、低合金鋼和不銹鋼鑄件 | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines |
A358/A358M-04 | 高溫用電熔焊奧氏體鉻鎳合金鋼管 | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
A363-03 | 地面架空線用鍍鋅鋼絲繩 | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand |
A367-60(1999) | 鑄鐵的激冷試驗方法 | Standard Test Methods of Chill Testing of Cast Iron |
A368-95a(2000) | 不銹鋼和耐熱鋼絲繩的標準 | Standard Specification for Stainless Steel Wire Strand |
A369/A369M-02 | 高溫用鍛制和鏜孔碳素鋼管和鐵素體合金鋼管 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service |
A370-03a | 鋼制品機械測試的標準試驗方法和定義 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
A372/A372M-03 | 薄壁壓力容器用碳素鋼及合金鋼鍛件 | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels |
A376/A376M-02a | 高溫中心站用無縫奧氏鋼管 | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service |
A377-03 | 球墨鑄鐵壓力管規范索引 | Standard Index of Specifications for Ductile-Iron Pressure Pipe |
A380-99e1 | 不銹鋼零件、設備和系統的清洗和除垢 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
A381-96(2001) | 高壓輸送用金屬弧焊鋼管 | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
A384/A384M-02 | 防止鋼組件熱浸鍍鋅時翹曲和扭曲用安全保護 | Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies |
A385-03 | 提供高質量鍍鋅覆層(熱浸) | Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) |
A387/A387M-03 | 壓力容器用鉻鉬合金鋼板 | Standard Specification for Pressure Vessel Plates, Alloy Steel,Chromium-Molybdenum |
A388/A388M-03 | 重型鋼鍛件超聲波檢測 | Standard Practice for Ultrasonic Examination of Heavy Steel Forgings |
A389/A389M-03 | 適合高溫受壓部件用經特殊熱處理的合金鋼鑄件規格 | Standard Specification for Steel Castings, Alloy, Specially Heat-Treated,for Pressure-Containing Parts, Suitable for High-Temperature Service |
A390-95(2001) | 飼養家禽用鍍鋅鋼絲欄柵網(六角形和直線形) | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
A391/A391M-01 | 80號合金鋼鏈條 | Standard Specification for Grade 80 Alloy Steel Chain |
A392-03 | 鍍鋅鋼絲鏈環欄柵網 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
A394-04 | 傳動塔架用鍍鋅和裸露鋼螺栓 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
A395/A395M-99e1 | 高溫用鐵素體球墨鑄鐵受壓鑄件 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
A400-69(2000) | 鋼棒的成分及機械性能選擇指南 | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties |
A401/A401M-03 | 鉻硅合金鋼絲 | Standard Specification for Steel Wire, Chromium-Silicon Alloy |
A403/A403M-04 | 鍛制奧氏體不銹鋼管配件 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
A407-93(2004) | 盤簧用冷拉鋼絲 | Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs |
A409/A409M-01 | 腐蝕場所或高溫下使用的焊接大口徑奧氏體鋼管 | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
A411-03 | 鍍鋅低碳鋼鎧裝線 | Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire |
A413/A413M-01 | 碳素鋼鏈 | Standard Specification for Carbon Steel Chain |
A414/A414M-04 | 壓力容器用碳素薄鋼板 | Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels |
A416/A416M-02 | 預應力混凝土用無涂層七股鋼鉸線 | Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete |
A417-93(2004) | 之字形、方形、正弦形家具用彈簧元件用冷拔鋼絲 | Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag,Square-Formed, and Sinuous-Type Upholstery Spring Units |
A418-99(2003) | 渦輪機及發電機鋼轉子鍛件的超聲波檢查方法 | Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings |
A420/A420M-04 | 低溫下用鍛制碳素鋼和合金鋼管配件 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
A421/A421M-02 | 預應力混凝土用無涂層消除應力鋼絲的技術規范 | Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete |
A423/A423M-95(2000) | 無縫和電焊低合金鋼管 | Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes |
A424-00 | 搪瓷用鋼薄板 | Standard Specification for Steel, Sheet, for Porcelain Enameling |
A426/A426M-02 | 高溫用離心鑄造的鐵素體合金鋼管 | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service |
A427-02 | 冷軋和熱軋用鍛制合金鋼輥 | Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction |
A428/A428M-01 | 鋼鐵制品上鋁覆層重量的測試方法 | Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles |
A434-04 | 熱軋與冷精軋經回火及淬火的合金鋼棒 | Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished,Quenched and Tempered |
A435/A435M-90(2001) | 鋼板的直射束縱向超聲波檢驗 | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
A436-84(2001) | 奧氏體灰口鐵鑄件 | Standard Specification for Austenitic Gray Iron Castings |
A437/A437M-01a | 高溫用經特殊處理的渦輪型合金鋼螺栓材料 | Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service |
A439-83(1999) | 奧氏體可鍛鑄鐵鑄件 | Standard Specification for Austenitic Ductile Iron Castings |
A447/A447M-93(2003) | 高溫用鎳鉻鐵合金鋼鑄件(25-12級) | Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service |
A449-04a | 經淬火和回火的鋼螺栓和螺柱 | Standard Specification for Quenched and Tempered Steel Bolts and Studs |
A450/A450M-04 | 碳素鋼管、鐵素體合金鋼管及奧氏體合金鋼管 | Standard Specification for General Requirements for Carbon, Ferritic Alloy,and Austenitic Alloy Steel Tubes |
A451/A451M-02 | 高溫用離心鑄造的奧氏體鋼管 | Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service |
A453/A453M-03 | 具有同奧氏體鋼相類似的膨脹系數、屈服強度為50-120Ksi(345-827MPa)的耐高溫螺栓材料 | Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
A455/A455M-03 | 壓力容器用高強度碳錳鋼板 | Standard Specification for Pressure Vessel Plates, Carbon Steel,High-Strength Manganese |
A456/A456M-99(2003) | 大型曲軸鍛件的磁粉檢查 | Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings |
A459-97(2003) | 鍍鋅平軋扁鋼鎧裝帶 | Standard Specification for Zinc-Coated Flat Steel Armoring Tape |
A460-94(2004)e1 | 包銅鋼絲繩標準 | Standard Specification for Copper-Clad Steel Wire Strand |
A463/A463M-02a | 熱浸鍍鋁薄鋼板 | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process |
A466/A466M-01 | 非焊接碳素鋼鏈 | Standard Specification for Weldless Chain |
A467/A467M-01 | 機器鏈和盤旋鏈 | Standard Specification for Machine and Coil Chain |
A469-04 | 用于發電機轉子的真空處理鋼鍛件 | Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors |
A470-03 | 渦輪機轉子和軸用經真空處理的碳素鋼和合金鍛件 | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts |
A471-02 | 渦輪轉子轉盤和轉輪用真空處理合金鋼鍛件技術規范 | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels |
A472-98(2003) | 蒸汽渦輪機軸及轉子鍛件的熱穩定性的試驗方法 | Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings |
A473-01 | 不銹和耐熱鋼鍛件 | Standard Specification for Stainless Steel Forgings |
A474-03 | 包鋁鋼絲繩標準 | Standard Specification for Aluminum-Coated Steel Wire Strand |
A475-03 | 鍍鋅鋼絲繩 | Standard Specification for Zinc-Coated Steel Wire Strand |
A476/A476M-00 | 造紙廠干燥輥用球墨可鍛鑄鐵件 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
A478-97(2002) | 鉻鎳不銹鋼和耐熱鋼制編織鋼絲 | Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
A479/A479M-04 | 鍋爐及壓力容器用不銹鋼和耐熱鋼棒與型材 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
A480/A480M-04 | 扁平軋制耐熱不銹鋼厚板材、薄板材和帶材通用要求 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A481-94(2000) | 金屬鉻 | Standard Specification for Chromium Metal |
A482-93(2000) | 鉻鐵硅 | Standard Specification for Ferrochrome-Silicon |
A483-64(2000) | 硅錳合金 | Standard Specification for Silicomanganese |
A484/A484M-03a | 不銹及耐熱鍛鋼棒,鋼坯及鍛件的規格 | Standard Specification for General Requirements for Stainless Steel Bars,Billets, and Forgings |
A485-03 | 高淬透性耐磨軸承鋼的技術規范 | Standard Specification for High Hardenability Antifriction Bearing Steel |
A487/A487M-93(1998) | 受壓鋼鑄件 | Standard Specification for Steel Castings Suitable for Pressure Service |
A488/A488M-01e1 | 鋼鑄件焊接規程和工作人員的合格鑒定 | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel |
A489-04 | 碳素鋼吊耳 | Standard Specification for Carbon Steel Lifting Eyes |
A490M-04a | 最小拉伸強度為150千磅/平方英寸熱處理鋼結構螺栓 | Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength |
A490-04a | 最小拉伸強度為150千磅/平方英寸熱處理鋼結構螺栓 | Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] |
A491-03 | 鍍鋁鋼鏈環欄柵結構 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
A492-95(2000) | 耐熱不銹鋼絲繩 | Standard Specification for Stainless Steel Rope Wire |
A493-95(2000) | 冷鐓和冷鍛不銹鋼和耐熱鋼絲 | Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
A494/A494M-03ae1 | 鎳和鎳合金鑄件 | Standard Specification for Castings, Nickel and Nickel Alloy |
A495-94(2000) | 硅鈣合金鋼技術規范 | Standard Specification for Calcium-Silicon Alloys |
A496-02 | 鋼筋混凝土用變形鋼絲 | Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement |