綜合資訊
公司名稱：南昌孟龍實業有限公司
聯系人：劉經理(13767010068)
固定電話：0791-86653069
文本傳真：0791-86653269
電子郵箱:menglonggj@126.com
公司地址:江西省南昌市灌嬰路金潤二期6棟32-33號
ASTM-A鋼材標準（4）（A657-A790）
發布人：管理員 發布日期：2014-11-13 08:47:09
| ASTM-A鋼材標準（4）（A657-A790） | ||
| 標準號 | 中文名稱 | 英文名稱 |
| A657/A657M-03 | 一次和二次壓延電解鍍鉻黑鋼板軋制品技術規范 | Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced |
| A659/A659M-97(2001) | 商業級熱軋?zhí)妓劁摫“搴蛶Р?最大含碳量為0.16%-0.25%) | Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled |
| A660-96(2001) | 高溫用離心鑄造碳素鋼管 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
| A662/A662M-03 | 中溫和低溫壓力容器用錳碳鋼板規格 | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
| A663/A663M-89(2000) | 商品級碳素鋼棒的機械特性 | Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties |
| A664-99 | 在ASTM規范中對電工鋼和層壓鋼級別的識別 | Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications |
| A666-03 | 退火或冷加工的奧氏體不銹鋼薄板、帶材、中厚板和扁棒 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| A667/A667M-87(2003) | 離心鑄造的雙金屬(灰口及白口鑄鐵)圓柱體 | Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders |
| A668/A668M-04 | 一般工業用碳素鋼和合金鋼鍛件 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
| A671-04 | 常溫和較低溫用電熔焊鋼管 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
| A672-96(2001) | 中溫高壓用電熔焊鋼管 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
| A673/A673M-04 | 結構鋼沖擊試驗的取樣程序 | Standard Specification for Sampling Procedure for Impact Testing of Structural Steel |
| A674-00 | 水或其它液體用球墨鑄鐵管的聚乙烯包裝 | Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids |
| A675/A675M-03 | 專用熱軋?zhí)妓劁摪舻臋C(jī)械特性 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties |
| A677/A677M-99 | 全處理型無取向電工鋼 | Standard Specification for Nonoriented Electrical Steel Fully Processed Types |
| A678/A678M-00a | 結構用經回火和淬火的高強度低合金碳素鋼板規格 | Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates |
| A679/A679M-00 | 硬(冷)拉高抗拉強度鋼絲 | Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn |
| A681-94(1999) | 合金工具鋼 | Standard Specification for Tool Steels Alloy |
| A682/A682M-02 | 彈簧用冷軋高碳鋼帶材 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For |
| A683/A683M-99 | 半處理型無取向電工鋼 | Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types |
| A684/A684M-86(2002) | 冷軋高碳鋼帶材 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
| A686-92(1999) | 碳素工具鋼 | Standard Specification for Tool Steel, Carbon |
| A688/A688M-03 | 焊接的奧氏體不銹鋼給水加熱器管 | Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| A689-97(2002) | 彈簧用碳素鋼及合金鋼棒 | Standard Specification for Carbon and Alloy Steel Bars for Springs |
| A690/A690M-00a | 在海洋環境中使用的高強度低合金工字形鋼樁和薄板樁規格 | Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments |
| A691-98(2002) | 高溫下高壓裝置用電熔焊碳素鋼和合金鋼管 | Standard Specification for Carbon and Alloy Steel Pipe,Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| A693-03 | 沉淀硬化耐熱不銹鋼板、薄板和帶材 | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A694/A694M-03 | 高壓傳輸設備用碳素鋼及合金鋼管法蘭、配件、閥門及零件用鍛件 | Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service |
| A696-90a(2000) | 壓力管道部件專用熱鍛或冷精軋?zhí)妓劁摪?/td> | Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components |
| A697/A697M-03 | 用伏特計、安培計和瓦特計法測定迭層鐵芯樣品的交流磁特性的試驗方法 | Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods |
| A698/A698M-02 | 在弱交流磁場中磁屏蔽效率的試驗方法 | Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields |
| A700-99e1 | 鋼制品國內裝運的包裝、標記和裝載方法 | Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment |
| A701-96(2000) | 硅錳鐵 | Standard Specification for Ferromanganese-Silicon |
| A702-89(2000) | 熱鍛鋼柵欄柱和組件 | Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought |
| A703/A703M-04a | 受壓部件用鋼鑄件 | Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts |
| A704/A704M-01 | 混凝土加筋用焊接普通鋼棒或桿的光面鋼筋或鋼筋網 | Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement |
| A705/A705M-95(2000) | 時效硬化的不銹和耐熱鋼鍛件 | Standard Specification for Age-Hardening Stainless Steel Forgings |
| A706/A706M-04a | 混凝土配筋用變形低合金光面無節鋼筋 | Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
| A707/A707M-02 | 低溫設備用鍛制碳素鋼和合金鋼法蘭 | Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service |
| A709/A709M-04 | 橋梁用結構鋼 | Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges |
| A710/A710M-02 | 低碳時效硬化的鎳銅鉻鉬鈮合金鋼 | Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates |
| A711-04 | 鋼鍛件坯料 | Standard Specification for Steel Forging Stock |
| A712-97(2002) | 軟磁性合金電阻率的測試方法 | Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys |
| A713-04 | 熱處理部件用高碳彈簧鋼絲 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| A714-99(2003) | 高強度低合金焊接鋼管和無縫鋼管 | Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
| A716-03 | 球墨鑄鐵涵洞管 | Standard Specification for Ductile Iron Culvert Pipe |
| A717/A717M-01 | 單片樣品表面絕緣電阻率的試驗方法 | Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens |
| A719/A719M-02 | 磁性材料的疊裝系數的試驗方法 | Standard Test Method for Lamination Factor of Magnetic Materials |
| A720/A720M-02 | 無取向電工鋼延展性的試驗方法 | Standard Test Method for Ductility of Nonoriented Electrical Steel |
| A721/A721M-02 | 取向的電工鋼的延展性試驗方法 | Standard Test Method for Ductility of Oriented Electrical Steel |
| A722/A722M-98(2003) | 預應力混凝土用無涂覆的高強度鋼筋 | Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete |
| A723/A723M-02 | 高強度壓力元件用合金鋼鍛件 | Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application |
| A724/A724M-04 | 疊層焊接的壓力容器用經淬火及回火的碳素鋼壓力容器板 | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels |
| A726-00 | 半成品型冷軋磁性迭片級鋼 | Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel,Semiprocessed Types |
| A727/A727M-02 | 具有固定切口韌性的管道部件用碳素鋼鍛件 | Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness |
| A729-93(1999) | 貨物運輸及電氣鐵路用熱處理合金鋼軸 | Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service |
| A730-93(1999) | 鐵路用碳素鋼及合金鋼鍛件 | Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use |
| A732/A732M-02 | 一般設備用熔模鑄造碳素低合金鋼及高強度加溫鈷合金鋼鑄件 | Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
| A733-03 | 焊接及無縫碳素鋼和奧氏體不銹鋼管接頭 | Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples |
| A734/A734M-87a(2003) | 經淬火和回火的合金鋼與高強度低合金鋼壓力容器板 | Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered |
| A735/A735M-03 | 中溫和低溫用低碳錳鉬鈳合金鋼壓力容器板 | Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service |
| A736/A736M-03 | 低碳時效硬化的鎳銅鉻鉬鈮和鎳銅錳鉬鈮合金鋼壓力容器板 | Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel |
| A737/A737M-99 | 高強度低合金鋼壓力容器板 | Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel |
| A738/A738M-03a | 中溫和低溫設備用經熱處理的碳錳硅鋼壓力容器板 | Standard Specification for Pressure Vessel Plates, Heat-Treated,Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
| A739-90a(2000) | 升溫或/和加壓部件用熱軋合金鋼棒 | Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both |
| A740-98(2003) | 鋼絲網(編織或焊接電鍍鋼絲網) | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| A741-98(2003) | 公路護欄用鍍鋅鋼絲繩和配件 | Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail |
| A742/A742M-03 | 波紋鋼管用預涂聚合物和金屬涂覆鋼薄板 | Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe |
| A743/A743M-03 | 一般用耐腐蝕鉻鐵及鎳鉻鐵合金鑄件 | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel,Corrosion Resistant, for General Application |
| A744/A744M-00e1 | 嚴酷條件下使用的耐腐蝕鎳鉻鐵合金鑄件 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
| A745/A745M-94(2003) | 奧氏體鋼鍛件的超聲波檢驗 | Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings |
| A746-03 | 排污管用球墨鑄鐵 | Standard Specification for Ductile Iron Gravity Sewer Pipe |
| A747/A747M-99 | 沉淀硬化不銹鋼鑄件 | Standard Specification for Steel Castings, Stainless, Precipitation Hardening |
| A748/A748M-87(2003) | 壓力容器用靜態鑄造的激冷白口鐵-灰口鐵雙金屬軋輥 | Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use |
| A749/A749M-97(2002) | 熱軋?zhí)妓劁摵透邚?qiáng)度低合金鋼帶材通用要求 | Standard Specification for Steel, Strip, Carbon and High-Strength,Low-Alloy, Hot-Rolled, General Requirements for |
| A751-01 | 鋼制品化學分析的實驗方法、操作和術語 | Standard Test Methods,Practices, and Terminology for Chemical Analysis of Steel Products |
| A752-04 | 合金鋼條和粗圓鋼絲 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel |
| A752M-04 | 合金鋼條和粗圓鋼絲(米制) | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] |
| A753-02 | 鎳鐵軟磁合金 | Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) |
| A754/A754M-96(2000) | X射線熒光涂層厚度的試驗方法 | Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence |
| A755/A755M-03 | 外露建筑材料用熱浸涂覆和用卷涂工藝預涂的鋼薄板 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| A756-94(2001) | 耐磨不銹軸承鋼 | Standard Specification for Stainless Anti-Friction Bearing Steel |
| A757/A757M-00 | 低溫下承壓設備及其它設備用鐵素體和馬氏體鋼鑄件 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service |
| A758/A758M-00 | 具有改進的切口韌性的對縫焊鍛制碳素鋼管配件 | Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
| A759-00 | 起重機用碳鋼軌條 | Standard Specification for Carbon Steel Crane Rails |
| A760/A760M-01a | 下水道和排水溝用金屬涂覆的波紋鋼管 | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
| A761/A761M-04 | 現場栓接管、管拱和拱用波紋鍍鋅結構鋼板 | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated,for Field-Bolted Pipe, Pipe-Arches, and Arches |
| A762/A762M-00 | 下水道和排水溝用預涂聚合物波紋鋼管 | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
| A763-93(2004) | 鐵素體不銹鋼晶間腐蝕敏感性檢測 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels |
| A764-95(2001) | 機械彈簧用冷拉鍍鋅和按成品尺寸鍍鋅的碳素鋼絲 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| A765/A765M-01 | 具有強制性韌性要求的碳素鋼及低合金鋼壓力容器部件鍛件 | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements |
| A767/A767M-00b | 鋼筋混凝土用鍍鋅鋼筋 | Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement |
| A768-95(2001) | 渦輪機轉子及軸用經真空處理的含鉻12%的合金鋼鍛件 | Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| A769/A769M-00 | 電阻焊鋼結構型材 | Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes |
| A770/A770M-03 | 專用鋼板通過厚度測量進行的抗拉試驗 | Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications |
| A771/A771M-95(2001) | 增殖反應堆堆芯部件用奧氏體不銹鋼管 | Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components |
| A772/A772M-00 | 正弦電流用材料的交流磁導率的試驗方法 | Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current |
| A773/A773M-01 | 用帶直流電子的磁滯曲線記錄儀的（B－H）回路法測量材料的磁性能的標準試驗方法 | Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs |
| A774/A774M-02 | 低溫和中溫一般腐蝕情況下用的焊接鍛制奧氏體不銹鋼配件 | Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures |
| A775/A775M-04a | 涂環氧樹脂的鋼筋鋼棒 | Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
| A778-01 | 焊接未退火的奧氏體不銹鋼管形制品 | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
| A779/A779M-00 | 預應力混凝土用應力消除未涂覆的密實七股鋼絲絞繩 | Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted,Stress-Relieved for Prestressed Concrete |
| A780-01 | 熱浸鍍鋅層的損壞及無覆層區域的檢修 | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
| A781/A781M-04a | 一般工業用一般要求的鋼和合金鑄件 | Standard Specification for Castings, Steel and Alloy, Common Requirements,for General Industrial Use |
| A782/A782M-90(2001) | 經淬火和回火的錳鉻鉬硅鋯合金鋼壓力容器板 | Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered,Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel |
| A786/A786M-00b | 軋制鋼樓板 | Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
| A787-01 | 電阻焊金屬涂覆碳素鋼機械配管 | Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing |
| A788-04a | 鋼鍛件 | Standard Specification for Steel Forgings, General Requirements |
| A789/A789M-04a | 普通設備用無縫與焊接鐵素體/奧氏體不銹鋼管 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
| A790/A790M-04a | 無縫與焊接鐵素體/奧氏體不銹鋼管 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
